Clifton water quality report for 2023 released

The City of Clifton has released its 2023 Consumer Confidence Report on public water quality, detailing the sources and quality of the city’s water supply from January 1 to December 31, 2023. This report provides a comprehensive overview of the water quality, including the presence of contaminants, compliance with regulatory standards, and information on water treatment processes.

Water sources

Clifton’s water supply is derived from both surface and groundwater sources. Surface water is obtained from the North Bosque River impoundment reservoir located 0.3 miles east of State Hwy 6 and the Truman Blum Reservoir at FM 3220, 1.25 miles west of State Hwy 6. Groundwater is sourced from multiple wells tapping into the Middle Trinity Aquifer, specifically Wells 4, 5, 6, and 7, all situated in Clifton.

Contaminants and water quality

The report emphasizes that while drinking water, including bottled water, may contain small amounts of contaminants, these do not necessarily pose health risks. Contaminants found in water can originate from various sources, including natural mineral deposits, agricultural runoff, and industrial activities.

Dedections

• Haloacetic Acids (HAA5): Detected at a highest level of 25 ppb, with individual samples ranging from 1.5 to 45.5 ppb. The MCL for HAA5 is 60 ppb.

• Total Trihalomethanes (TTHM): Detected at a highest level of 66 ppb, with individual samples ranging from 11.5 to 91.8 ppb. The MCL for TTHM is 80 ppb.

• Arsenic: Detected at a highest level of 1 ppb, with a range of 0 to 1.2 ppb. The MCL is 10 ppb.

• Barium: Detected at a highest level of 0.065 ppm, with a range of 0.037 to 0.065 ppm. The MCL is 2 ppm.

• Fluoride: Detected at a highest level of 0.5 ppm, with a range of 0.205 to 0.593 ppm. The MCL is 4.0 ppm.

• Nitrate (measured as Nitrogen): Detected at a highest level of 0.0935 ppm, with a range of 0 to 0.0935 ppm. The MCL is 10 ppm.

• Beta/Photon Emitters: Detected at 4.7 pCi/L, with the MCL being 50 pCi/L.

• Combined Radium 226/228: Detected at 1.5 pCi/L, with the MCL being 5 pCi/L.

• Lithium: Detected at an average level of 63.92 ppb, with a range of 27.5 to 85 ppb. This is an unregulated contaminant, and no MCL has been established.

Lead and Copper

The report notes that lead and copper levels were well within safe limits, with copper detected at 0.0911 ppm and no violations reported. Lead testing showed no exceedances of the action level, emphasizing the city's responsibility in maintaining high-quality water and advising residents on reducing lead exposure by flushing taps before use.

Disinfectant residuals and turbidity

Disinfectant levels and turbidity measurements indicated effective water treatment processes. The highest level of disinfectant detected was 2.65 ppm, with no violations noted. Turbidity levels were within acceptable limits, indicating efficient filtration and treatment.

Vulnerable populations The report highlights that certain populations, such as infants, the elderly, and immunocompromised individuals, may be more vulnerable to microbial contaminants. It advises these groups to seek guidance from healthcare providers regarding their drinking water.

Contact information

For further information or questions regarding this report, residents can contact Craig Wickman at (254) 675-8337. The report is also available in Spanish to assist non-English speaking residents.